| Material Safety Data Sheets |
MATERIAL
SAFETY
|
COMPANY NAME: Dial
Manufacturing, Inc. Tel. No.: |
NFPA Hazard Class: Health Hazard: 0 0 = Least Flammability: 1 1 =
Slight Reactivity: 0 2 =
Moderate Other: 3 = High |
I. PRODUCT IDENTIFICATION
|
PRODUCT NAME: Synonyms: Turbine
Oil 100% Grade IS032 Generic Name: Industrial
Oil |
PRODUCT NUMBER: Dial 5713 |
II. HAZARDOUS INGREDIENTS
|
Ingredient/ Oil Mist, if
generated |
TLV 5.00 |
Units MG/M3 |
Agency OSHA |
Type Full Term |
|
Eye Contact: |
For direct contact,
flush the affected eye(s) with clean water.
If irritation or redness develops, seek medical attention. |
|
Skin Contact: |
Do not use
gasolines, thinners or solvents to remove product from skin. Wipe material from skin and remove
contaminated clothing. Cleanse
affected area(s) thoroughly by washing with soap and water and, if necessary,
a waterless skin cleanser. If
irritation or redness develops and persists, seek medical attention. |
|
Inhalation (Breathing): |
If irritation of
nose or throat develops, move away from source of exposure and into fresh
air. If irritation persists, seek
medical attention. If victim is not
breathing or if breathing difficulties develop, artificial respiration or
oxygen should be administered by qualified personnel. Seek immediate medical attention. |
|
Ingestion (Swallowing): |
If victim is
conscious and alert, give 2 to 3 cups of milk or water to drink. Seek medical attention. To Physician: Emesis or lavage is not recommended for
ingestions of minute quantities or tastes of most hydrocarbons. Medical opinion is divided for larger
ingestions. Emesis or lavage has been
recommended for those petroleum products which have a high oral toxicity. Gastric lavage with a cuffed endotracheal
tube is recommended by some physicians to prevent aspiration. |
IV. POTENTIAL ADVERSE HEALTH EFFECTS
|
Eye Contact: |
This material may
cause eye irritation. Direct contact
may cause burning, tearing and redness. |
|
Skin Contact: |
This material may
cause skin irritation. Prolonged or
repeated contact may cause redness, burning and dermatitis. |
|
Inhalation (Breathing): |
Exposure to mists,
or prolonged or repeated exposure to fumes or vapors that may be generated
when this material is heated, may cause irritation of nose and throat. |
|
Ingestion (Swallowing): |
Accidental
ingestion of this material may cause irritation of the digestive tract. |
V. SPECIAL PROTECTION INFORMATION
|
Ventilation: |
If current
ventilation practices are not adequate in maintaining airborne concentrations
below the established exposure limits (see Section I), additional ventilation
or exhaust systems may be required. |
|
Respiratory Protection: |
If airborne
concentrations exceed recommended exposure limits, a suitable filter-type
respirator should be worn (see Section I). |
|
Protective Gloves: |
The use of gloves
impermeable to the specific material handled is advised to prevent skin
contact and possible irritation. |
|
Eye Protection: |
Approved eye
protection to safeguard against potential eye contact, irritation or injury
is recommended. |
|
Other Protective Equipment: |
It is suggested
that a source of clean water be available in work area for flushing eyes and
skin. Barrier creams that are specific
for oil-based materials are recommended when gloves are impractical. |
|
Stability: |
Stable |
|
Conditions to Avoid (Stability): |
|
|
Incompatibility (Materials to Avoid): |
Avoid contact with
strong oxidizing agents. Extended
exposure to high temperatures may cause decomposition. |
|
Hazardous Decomposition Products: |
Thermal
decomposition in the presence of air may yield amounts of oxides of carbon and
minor amounts of oxides of sulphur and nitrogen. |
|
Hazardous Polymerization: |
Will not occur. |
|
Precautions in Case of Release
or Spill: |
Collect leaking
liquid in sealable containers. Absorb
spilled liquid in sand or inert absorbent.
Contact fire authorities and appropriate State/Local agencies. If spill of any amount is made into or upon
|
|
Waste Disposal Method: |
Dispose of produce
in accordance with Local, County, State and Federal regulations. |
|
Handling and Storage Precautions: |
Store in a cool,
dry location. Keep away from
incompatible materials (See Section V).
Avoid generating oil mist while handling. Avoid prolonged or repeated skin
contact. Wash thoroughly after
handling. Do not wear oil-soaked
clothing or shoes. |
|
DOT Flammability Classification: Not Regulated |
Flash
Point: 388, 188C |
|
|
Extinguishing Media: |
Extinguish with dry
chemical, COČ, water spray, foam, sand or earth. Water and foam may cause frothing. |
|
|
Fire & Explosion Hazards: |
This material will
burn, but will not ignite readily. |
|
|
Fire Fighting Procedures: |
Water
spray may be useful in minimizing vapors and cooling containers exposed to
heat and flame. Avoid spreading
burning liquid with water used for cooling purposes. Move undamaged containers from fire area if
you can do so without risk. |
|
X. PHYSICAL
|
Approx. Boiling Range Above 600 F (316) C % Solubility in Water Negligible |
Vapor Density Heavier than Air Specific Gravity 0.88 |
Evaporation Rate Slower then Ether Appearance Clear, Yellow |
% Volatile Negligible Odor Characteristic |
|
D.O.T.: |
Not Regulated |
|
Shipping Name: |
Not Applicable |
|
ID Number: |
None |
|
ISSUE DATE: Disclaimer
of Expressed and Implied Warranties The information in
this document is believed to be correct as of the date issued. However, no warranty of
merchantability, fitness for any particular purpose, or any other warranty is
expressed or is to be implied regarding the accuracy or completeness of this
information, the results to be obtained from the use of this information or
the product, the safety of this product, or the hazards related to its use. This information
and product are furnished on the condition that the person receiving them
shall make his own determination as to the suitability of the product for his
particular purpose and on the condition that he assumes the risk of use
thereof. |